• SLOTTED PIPE (2).jpg
  • SLOTTED PIPE (4).jpg
  • SLOTTED PIPE (3).jpg
  • SLOTTED PIPE (1).jpg

Slotted Pipe

Application: Used as Walls Structural Retainers and Screen Pipes for Oil, Gas and Water Wells Specification: OD: 50mm - 500mm;WT: less than 20mm;LENGTH: less than 15m Slot&Holes Specification: as customer require Standard & Grade: API , API5CT J55/K55/N80/C75/L80/C90/T95/Q125 Process Type: Seamless (SMLS), Electric Resistance Welded (ERW) End: Plain, Beveled, Square Cut, With LTC/STC/BTC Connection Surface: Anti-corrosion&water Painting Packing: Protection Caps in Both Ends, Waterproof Paper Wrapped



Slot and perforate on the pipe body to be slotted pipes. The types of slot are Perforated, Rectangular slotted, Trapezoid slotted, Bridge slotted, Wire wrapped screen, Mechanical cutting, Compound slotted pipe.

The slotted pipe is using in oil exploration to prevent sand, decrease oil well repaired, increase oil well’s strength, integrality and stability of keeping off sand.

1.Casing slotted pipe specification:

O.D.: Casing: 4 1/2″-20″ (114.3mm-508mm)



W.T.: 0.205” – 0.875” (5.21mm- 22.22mm)

Product standards: API 5CT, BS EN ISO11960, NFM87-207, JIS G3439, ISO 4270, GOST 632-80

Material: H40, J55, K55, N80-1, N80Q, R95, L80-1, L80-9Cr, L80-13Cr, C90, T95, C110, P110, Q125

2. Thread type:

Casing: STC, LTC, BTC etc.

Tubing: NU, EU, XL, PH-4, PH-6, LTC, STC, BTC etc.

3. Slotted type

(1)Straight Slots

Cut at a right angle to the liner, this slot type shows the same diameter from the inside to the outside of the wall. Although straight slots are cheaper to produce, they are less effective in sand control compared to keystone slots.

(2)Keystone Slots

Cut at a slight angle, keystone slots, or tapered slots, are larger on the inside than on the outside, making sure that any particle entering the slot can pass through freely without clogging the slot.

Keystone slots are more expensive to than straight slots, but lower the risk of production losses due to plugged liner slots.

(3)Slot Patterns

Whether you want your slotted pipe with a line, staggered, gang, overlapping, horizontal, or any other pattern, we can cut them all.

Among all slot patterns, the following three are the most common.

(4)Line (Straight) Pattern

In the line pattern, slots are placed evenly in identical bands around the pipe, forming straight lines of slots across the length of the slotted liner.

(5)Single-Slot Staggered Pattern

In the single-slot staggered pattern, bands of evenly spaced slots are placed around the pipe. Slots in different bands are offset (staggered) to each other.

The single-slot staggered pattern preserves the strength of the pipe and provides an even distribution of the slots over the area of the pipe.

(6)Gang Pattern (Multiple Staggered Pattern)

While having the same overall layout as the single-slot staggered pattern, the gang pattern places two slots, cut at close proximity, instead of just one slot at each position.

Slotted pipe with a multiple staggered pattern has been shown to withstand higher torque during installation and provide better resistance to deformation under thermal load compared to the single-slot staggered pattern, making it well suited for application in steam assisted gravity drainage (SAGD) applications.

4. Assurance

API/ISO quality system, SGS, DNV, BV, Moody third party inspection welcomed



API Casing ID Length Slot Length Slot Slot width Slot Tolerance Valid Filter Area
  mm m mm No.No./m mm   cm/m



Packing and shipping

 Now the main business scope of our company covers various kinds of Stainless steel and carbon steel materials , such as hot rolled / cold rolled stainless steel coils / sheet , Seamless / welded stainless steel pipe ( tube ).






Warehouse Storage

As a steel supplier in Shandong Province, Zhongyilian Steel (Shandong) Co., Ltd. has its own factory.


Customer conversation

We have advanced technology and equipment, and we have a highly qualified management team with energy and service consciousness. So far, we have more than 1000 regular customers and we have ISO,CE certification.


Application field

We promise to provide the right products at the right time. The products are exported to Southeast Asia, the Middle East, North America, South America, Europe, Africa, Australia and other regions, forming a global marketing network.




Q: Do you accept the third party inspection?

A: Yes absolutely we accept.

Q: Do you provide the samples? Free or Extra?

A: The cost of the samples is according to the value.The cost of the freight is necessary.

Q: About the complaint,quality problem,etc after-sales service,how do you handle it?

A: We will have certain colleague to follow our order accordingly for each order with professional after-sales service. If any claim happen, we will take our responsibility and compensate as per contract. For better serve our client, we'll keep tracing feedback of our products from clients and that's what make us different from other suppliers. We're customer care enterprise and our mission is to add honor to Made in China.

Q: How can you ensure the quality of your product?

A: All products have to go through three checks in the whole manufacturing process,it includes production and Random Testing in warehouse and Before Shipping.

Q: What is your delivery time and the supply ability?

A:The delivery time normally within 15~28working days,we can supply about 10,000tons every month.

Q: Do you have large amount of steel products in stock?

A: Yes , we have a large-scale indoor warehouse with perennial spot stocks totally above 5000 tons.

Q: How to order?

A: Buyer sends the enquery --> Buyer gets the quotation --> Order confirmation --> Buyer send the deposit --> Seller prepares goods --> Seller makes the strict inspection --> Buyer Arranges Balance Payment --> packing and delivery

Q: Can I get your best price?

A: Price is different based on steel grade, size and quantity. Our goal is to provide you the best price with great quality assured in a long run. Please leave your contact information for the best quotations, we will get back to you with the best solutions as soon as we can. Please give those info. for price checking. If the required is sheet metal fabrication, please send drawing.