Slotted Deflection Track

Slotted Deflection Track is designed to give the top of a steel stud wall the ability to float within the track legs. This arrangement allows vertical live load movement of the primary structure to

Description

Slotted Deflection Track is designed to give the top of a steel stud wall the ability to float within the track legs. This arrangement allows vertical live load movement of the primary structure to occur without transferring axial loads to the wall studs. By allowing the wall head connection to accommodate movement, the track supports a practical approach to framing situations where the primary structure may move vertically while the wall remains in position. It is suitable for use wherever controlled movement at the top of a steel stud wall is an important consideration during planning, installation, and ongoing building operation. The track provides a defined framing component for coordinating the wall top with the surrounding structural system, helping installers follow a clear and consistent approach when assembling the wall framing. Its slotted deflection design also makes it a useful choice for projects that require attention to structural movement, wall interface conditions, and the long-term performance of non-load-transferring wall framing.


Materials

Galvanized Strong Steel Material DX51D, with zinc 120-275g. The steel material provides the basis for a durable track component used in steel stud wall framing. The galvanized finish is specified for the product and supports material protection during handling, storage, and installation. DX51D identifies the stated steel material grade, while the zinc specification is provided as 120-275g. Contractors and project teams can use this material information when reviewing product schedules, coordinating wall framing components, and confirming that the selected track corresponds with the requirements of the application. As with other framing materials, the track should be stored, handled, and installed in a manner that protects the supplied surface and keeps the component ready for accurate site use.


Specifications

The available Slotted Deflection Track sizes are listed below. The range includes widths of 64mm, 76mm, 92mm, and 150mm. Each listed width is available with a BMT of 0.75mm/1.15mm and a length of 3000mm. This specification range allows the product to be reviewed against the selected steel stud wall arrangement and project material schedule. Before ordering or installation, confirm the required width and BMT for the intended wall framing application, then coordinate the 3000mm track length with the site handling and installation process. Keeping the width, BMT, and length information together helps purchasing teams, estimators, installers, and supervisors identify the correct product option and maintain consistency between the planned wall system and the delivered material.


WidthBMTLength
64mm
0.75mm/1.15mm3000mm
76mm0.75mm/1.15mm3000mm
92mm0.75mm/1.15mm3000mm
150mm0.75mm/1.15mm3000mm


Packing&Loading

  • Slotted Deflection Track packing and preparation for shipment. The packing view shows the product arranged for handling, storage, and delivery to the project site. Organized packing supports easier identification of the track during receiving and helps the installation team keep the material grouped with other wall framing components.

  • Slotted Deflection Track loading for transportation. The loading view presents the product prepared for movement from the supply point to the jobsite. Careful loading and unloading help maintain orderly material flow and make it easier for project personnel to check, store, and distribute the track before installation.

Accessories